Utilization of Vacuum Pump in Harvesting Process of Stingless Bee Honey for Empowerment of Honey Farmer Community.

Muhammad Aby; Reza Putra; Muhammad Muhammad; Abdul Rahman; Ridho Hafiz; Nurul Islami

doi:10.56806/jh.v5i1.178

Authors

Muhammad Department of Material Engineering, Universitas Malikussaleh
R. Putra Department of Material Engineering, Universitas Malikussaleh
Muhammad Department of Chemical Engineering, Universitas Malikussaleh
A. Rahman Department of Mechanical Engineering, Universitas Malikussaleh
R. Hafiz Department of Mechanical Engineering, Universitas Malikussaleh
N. Islami Department of Material Engineering, Universitas Malikussaleh

DOI:

https://doi.org/10.56806/jh.v5i1.178

Keywords:

Vacuum Pump, Honey Farmer, Community Empowerment

Abstract

The process of harvesting stingless bee honey requires special tools, the use of vacuum pumps as a harvesting medium makes it easier for farmers, saves time, and maintains honey quality. The purpose of this service is to provide training to the community on how to use a honey harvesting tool with a vacuum pump with a capacity of 7 liters/minute, the assembly process and maintenance. From the results of the service that has been carried out for beekeepers in Pulo Meria Village, it is found that the honey suction tool from the Vacuum pump is very useful for farmers, easy to use, production capacity of 1 liter per hour and portable. The difference in the amount of capacity is due to the different honey harvesting process due to having different sized honey bags and different honeycomb contours. From the empowerment of the honey farming community, it was found that 89% of the farmers got better quality honey harvests and increased honey production by 57% more.

Downloads

Download data is not yet available.

References

Abdurohman, Kosim & Satrio, T & Muzayadah, Nurul & Teten,. (2018). A comparison process between hand lay-up, vacuum infusion and vacuum bagging method toward e-glass EW 185/lycal composites. Journal of Physics: Conference Series. 1130. 012018. 10.1088/1742-6596/1130/1/012018.

Abidin, Z., Thamrin, G. A., Naemah, D., & Faisal Mahdie, M. (2021). Pengembangan Usaha Budidaya Lebah Madu Kelulut Assyifa. PRO SEJAHTERA (Prosiding Seminar Nasional Pengabdian Kepada Masyarakat), 3. Hal:1-7 https://snlb.ulm.ac.id/prosiding/index.php/snlb

Idkham, M., Satryo, P., & Maulidi, M. (2023). Rancang bangun alat pemanen madu lebah tanpa sengat (Trigonasp.). Sultra Journal of Mechanical Engineering, 2(2), 73-81. https://doi.org/10.54297/sjme.v2i2.491

J. Jalaluddin, S. Akmal, Z. Nasrul, and I. Ishak, "Analisa Profil Aliran Fluida Cair dan Pressure Drop pada Pipa L menggunakan Metode Simulasi Computational Fluid Dynamic (CFD)," Jurnal Teknologi Kimia Unimal, vol. 8, no. 1, pp. 97-108, 2019.

Muhammad, Muhammad, Putra R, Rahman A, Hafis R , Rianda F. 2022. Pemberdayaan Peternak Lebah Trigona Pada Kelompok Usaha A Bee Honey di Gampong Alue Awe Kecamatan Muara dua. Jurnal Hurriah: Jurnal Evaluasi Pendidikan dan Penelitian Vol 3

Muhammad, M., Reza Putra, & Muhammad, M. (2021). Pemberdayaan Peternak Lebah Trigona Di Kecamatan Muara Dua Melalui Program Pengabdian Masyarakat Lppm Universitas Malikussaleh. Krida Cendekia, 1(05). Retrieved from http://kridacendekia.com/index.php/jkc/article/view/52

Oroian M, Ropciuc S. 2017. Honey authentication based on physicochemical parameters and phenolic compounds. Computers and Electronics in Agriculture. 138: 148–156. https://doi:10.1016/ j.compag.2017.04.020.

Rosawanti S, Hidayati N, Hariyadi, Hanafi N, Iskandar B. 2022. Pemberdayaan Masyarakat Dengan Budidaya Pakan Lebah dan Pemanenan Madu Kelulut. Jurnal Pengabdian Masyarakat Berkemajuan Vol 6

Syaputra, E.W., Pramitasari, R.E., Rosadi, M.M., Anisa, D., Wati, R., Kunci, K., Pengembangan, Madu, A.P., & Drat, D.S. (2024). PENGEMBANGAN ALAT PENYEDOT MADU KLANCENG HUTAN MENGGUNAKAN DINAMO SOCK DRAT 160 PSI DAN SPEED CONTROLLER. Jurnal MOTION ( Manufaktur, Otomasi, Otomotif, dan Energi Terbarukan).10

Susilawati, S., Itta, D., Rachmawati, N., Hidayah, E. N., & Nugroho, Y. (2022). PKM KT Harapan Maju Desa Kiram Kabupaten Banjar. Jurnal Pengabdian ILUNG (Inovasi Lahan Basah Unggul), 2(2). Hal: 345-351 https://doi.org/10.20527/ilung.v2i2.6190

Syaputra, E., Retno Eka Pramitasari, Mohammad Munib Rosadi, & Dian Anisa Rokhmah Wati. (2024). PENGEMBANGAN ALAT PENYEDOT MADU KLANCENG HUTAN MENGGUNAKAN DINAMO SOCK DRAT 160 PSI DAN SPEED CONTROLLER. Jurnal MOTION ( Manufaktur, Otomasi, Otomotif, Dan Energi Terbarukan), 2(02), 57–62. https://doi.org/10.33752/motion.v2i02.6228